Fuse Energy Referral Code: UHZAMA68708 & Get £100 Credit FREE

Fuse Energy referral code: UHZAMA68708

Fuse Energy referral code UHZAMA68708 is intended for a new domestic customer switching directly to Fuse Energy. This is a code-led offer page: no provider referral URL tied to UHZAMA68708 was published in the official material reviewed, so there is deliberately no referral link here. Enter the code exactly in Fuse’s own sign-up journey and check the on-screen offer before accepting a contract.

Fuse is a digital domestic energy supplier for gas and electricity. Its website advertises variable, fixed and multi-rate tariffs, an app for account and usage management, and services for some EV, solar and smart-home use cases. The right reason to switch is not the code alone: obtain a quote for your address, then compare the standing charge, unit rates, tariff type, term, exit fee (if any), payment basis and likely annual cost against your present deal.

The published Fuse referral terms currently describe £100 bill credit for the referring customer and £100 for the referred customer, subject to a live campaign and all conditions being met. That amount is documented by Fuse’s general referral terms, not a public page that verifies the individual code UHZAMA68708. Treat the app or sign-up screen as the final live confirmation of whether this code is active and which reward terms apply when you apply.

---

Code-led Fuse referral summary
Referral code to enter: UHZAMA68708
Referral link: None published by Fuse for the exact code UHZAMA68708; use the official sign-up route and enter the code there rather than assuming a third-party link tracks it.
Published campaign reward: Fuse’s referral terms state £100 credit for each side when the conditions are met. It is a credit against subsequent Fuse bills, not cash or a refundable balance.
Core qualifying action: Become a new Fuse customer using UHZAMA68708, take at least one eligible import electricity or gas supply, and pay the first full month’s bill by its due date.
Important restriction: The referred customer must not switch through a price-comparison website, and the campaign must be live in the Fuse app when the contract is made.
Reward timing: The terms do not promise a calendar payment date. They say that credit is offset against subsequent bills until used, after eligibility is calculated.

---

Fuse Energy offer at a glance

---

How to use Fuse Energy referral code UHZAMA68708

Use the following sequence to reduce avoidable referral and switching failures. It is deliberately cautious because a referral reward is conditional rather than an immediate discount at checkout.

1. Check that you are genuinely new to Fuse. The referral rules say the referred customer must not previously have been a Fuse customer. If you have held an account before, do not assume a new email address makes you eligible.
2. Prepare accurate property information. Have a recent bill, address, current supplier, fuel type, typical use and meter details to hand. Take a dated photo of a non-smart meter reading. Accurate inputs make the quote more meaningful and provide evidence if the opening reading later needs correcting.
3. Start directly with Fuse, not through a comparison website. The official referral terms explicitly exclude a referred customer who switched via a price-comparison website. Use Fuse’s own official onboarding route, then enter UHZAMA68708 exactly as shown before you accept a Fuse contract.
4. Confirm the code and campaign on screen. Because no official URL publicly ties UHZAMA68708 to a referral record, do not rely on an informal message or a third-party claim. Check that the code is accepted and retain screenshots of the code entry, campaign wording and contract confirmation.
5. Read the tariff quote before agreeing. Check every unit rate and standing charge for each fuel, whether the tariff is fixed, variable, tracker or multi-rate, the contract end date, payment method and any exit fee. A £100 future bill credit can be outweighed by a less competitive ongoing tariff.
6. Complete identity, account and payment setup promptly. Fuse’s supply terms require the customer to be at least 18, have authority for the property and use the supply mainly for domestic purposes. Statements and payment notifications are generally sent through the app, online account or email, so make sure those details work.
7. Let the switch complete and submit a reading if requested. Fuse says it aims to start supply within seven working days, subject to the switch and property data. A working smart meter may provide a reading automatically; otherwise give the requested reading through the app or email. Keep the final reading provided to the old supplier as well.
8. Pay the first full month’s bill by the due date. This is a formal referral condition for UHZAMA68708. A missed Direct Debit, an unpaid bill or leaving before the qualifying supply is established can prevent the reward. Query a bill early, but do not simply cancel the Direct Debit and assume the contractual debt disappears.
9. Watch subsequent bills for credit. If the campaign conditions are met, the published rules say the £100 is applied as bill credit against subsequent charges. It is not a cash withdrawal. If it is absent after the qualifying criteria are clearly complete, contact Fuse support with the code, sign-up evidence, supply-start date and first-bill payment evidence.

---

What Fuse Energy offers

Domestic gas and electricity managed through an app

Fuse supplies domestic energy rather than selling a physical product. Its service centres on a quote, an energy contract, monthly billing and a mobile app. The homepage describes forecasts updated every 30 minutes, usage tracking and tariff management, while also advertising 24-hour human support. These are useful digital tools, but they do not change the basic economics of an energy tariff: consumption in kilowatt-hours is charged at the quoted unit rate, and the standing charge accrues daily regardless of use.

Fuse’s wider product messaging includes EV charging integration, solar/export monitoring and multiple-property management. These features may be relevant for particular households, but should not be assumed to be included in every quote. Ask Fuse what is available for the exact meter configuration, property and tariff before switching. An import electricity account and an export arrangement are distinct: the referral terms specifically exclude export supply from the qualifying supply for the code UHZAMA68708.

Tariffs: fixed, variable, tracker and multi-rate

Fuse advertises fixed, variable and multi-rate tariffs. Under its supply terms, a fixed tariff keeps the quoted unit rate for the advertised period, while a variable tariff’s unit charge and standing charge can move with market conditions; Fuse says variable rates may change quarterly with advance communication. Its tracker tariff is calculated by reference to the Ofgem price cap, so it can move when the cap changes. A multi-rate tariff can suit a household able to shift consumption between periods, but it only works if the meter and pattern of use match the tariff.

Neither a fixed tariff nor a multi-rate tariff is automatically cheaper. Compare the full quote, not a headline saving. In particular, check whether your current supplier charges an exit fee, whether Fuse’s chosen tariff has one, and whether the offered meter is suitable. Fuse lists meter unsuitability, missing switch information, previous-supplier debt and a rejected switch request among factors that can delay supply. Its terms say a variable tariff has no exit fee, whereas a fixed or tracker offer may have one if disclosed in the contract.

Billing, Direct Debit and statements

Fuse bills for energy used using smart-meter reads, customer reads or estimates. If a bill is estimated, submit an actual reading promptly if it looks wrong; its terms say the next bill will be adjusted when an accurate reading proves the consumption differs. Fuse describes its Direct Debits as variable monthly payments linked to actual usage and account balance, not necessarily a flat annualised amount. Its contract terms also say that it gives at least three working days’ notice of the amount and date of a Direct Debit collection.

Keep enough funds available and inspect every advance notification. A failed Direct Debit can lead to the outstanding balance being collected later, a request for payment by another method, and any bank fees Fuse itself incurs. The terms also allow Fuse to remove a Direct-Debit-related discount or reward and move a customer to another plan if its Direct Debit provisions are not met. Standard credit is listed as a payment method where required. Paper communications carry a £1.50 monthly charge in the published supply terms, although customers on the Priority Services Register or for whom digital communications are unsuitable have different arrangements.

Smart meters and readings

A communicating smart meter can automatically provide readings and lets Fuse use consumption information for billing and, under its terms, half-hourly settlement. The app can show usage patterns and costs, which is useful for checking a multi-rate tariff or locating a large electrical load. It does not itself lower consumption or guarantee a lower bill. What it does provide is better data: an apparently higher bill after an accurate smart reading may reveal that earlier estimates were too low.

Smart functionality is not guaranteed forever. Fuse says that, if a meter drops off the network or cannot communicate, you may need to submit manual readings and some bills may be estimated. Report a damaged, tampered or malfunctioning meter or display promptly. Fuse also says customers with legacy RTS meters cannot switch to Fuse until their current supplier has upgraded the meter; confirm the current position for your address before beginning a switch. Do not interfere with meter equipment yourself.

---

Eligibility, switching and common failure points

The code UHZAMA68708 is not a general bill voucher. Referral eligibility depends on both people and the route to switch. The referrer needs to be an existing Fuse customer with no negative balance. The referred customer must be new to Fuse, use the referral code, enter a contract during the campaign period shown in the app, take an eligible import electricity or gas supply and pay the first full month by its due date. If either side fails its relevant conditions, the terms say neither side qualifies for credit.

Switching supplier should not interrupt the physical gas or electricity supply. Fuse says it aims to start supply within seven working days, while wider faster-switching guidance often refers to up to five working days; timing can differ where the data, meter or old account needs attention. You retain a 14-day cooling-off period after making a switch request under Fuse’s terms, but you remain responsible for energy used. Take an opening or final reading, keep account emails and check the old supplier’s final bill. If you move home, tell Fuse within 28 calendar days and provide a forwarding address so the final bill can be produced correctly.

---

Is the Fuse referral code worthwhile?

For a household that has already selected a competitive Fuse tariff and is comfortable with app-based account management, UHZAMA68708 can add meaningful value because the published reward is £100 bill credit after the first full-month payment condition is met. It is most suitable for a new domestic customer with an import electricity or gas supply, a stable address, reliable payment arrangements and enough confidence to track the switch and first bill. A working smart meter is helpful, particularly for households that want to understand time-of-use or EV charging patterns, but it is not a promise of lower rates.

It is less suitable to treat the referral as a reason to abandon a significantly cheaper tariff elsewhere, to switch via a comparison route and expect the reward, or to use it for an export-only solar account. It may also be a poor fit for anyone unable to use digital communications without support, anyone likely to move before the qualifying bill is paid, or anyone who would struggle with a variable Direct Debit. For a fixed tariff, assess the contract end and exit fee rather than assuming the £100 compensates for an inflexible deal.

Use an annual-cost comparison based on your own consumption, not an advertised maximum saving. Then treat the referral as a conditional, non-cash reduction of later Fuse bills. This distinction matters: the credit cannot be refunded, the campaign can be amended or cancelled under Fuse’s terms, and it is only calculated once the conditions are satisfied. If value for money is close, the code can tip the balance; it should not replace a tariff comparison.

---

Energy and account-safety cautions

A supplier switch is an account change, not an emergency-service change. For a power cut in England, Scotland or Wales, call 105 to reach the local electricity distribution network operator rather than waiting for billing support. For a suspected gas leak, a smell of gas or suspected carbon monoxide, call the National Gas Emergency Service on 0800 111 999, free and 24 hours a day. Open doors and windows if it is safe, turn off the gas at the meter and appliances if you can do so safely, and do not smoke, use a naked flame, operate electrical switches or enter a cellar. In immediate danger, leave the property and follow the emergency operator’s instructions.

Never bypass, damage or attempt to repair a gas meter, electricity meter, smart display, boiler or other gas appliance. A tariff, app or referral code does not make a supplier responsible for household appliance repair. For a faulty gas appliance, use a suitably qualified Gas Safe registered engineer; for meter faults, report the issue to Fuse. Also protect your account: only enter UHZAMA68708 in Fuse’s official app or website, do not disclose banking security codes to anyone claiming to be support, and verify unexpected payment messages through the official support channel.

---

Fuse Energy referral FAQs

What is the Fuse Energy referral code?

The code on this page is UHZAMA68708. There is no official public referral link tied to that exact code in the material reviewed, so enter UHZAMA68708 in Fuse’s direct sign-up flow and verify it is accepted before contracting.

How much does Fuse’s current referral programme pay?

Fuse’s published referral terms state £100 credit for the referrer and £100 credit for the referred customer, conditional on a live campaign and all rules being met. It is bill credit, not cash. Check the campaign shown when entering UHZAMA68708, because Fuse can change or end a campaign.

Can I use UHZAMA68708 after switching through a comparison website?

No. The published referral terms say a referred customer who switched via a price-comparison website is not eligible. If using UHZAMA68708, switch directly through Fuse after doing any independent comparison.

When should I receive the credit?

After the qualifying customer is supplied and has paid the first full month by the bill due date, Fuse applies the reward against subsequent bills. The terms do not give a guaranteed calendar date for UHZAMA68708.

Can an electricity export tariff qualify for UHZAMA68708?

No. Export supply does not count. The qualifying new supply for UHZAMA68708 must include import electricity or gas.

Do I need a smart meter to switch with UHZAMA68708?

Not generally, but meter suitability matters for particular tariffs. A working smart meter can provide automatic readings, while non-communicating or traditional meters may require manual readings. Fuse says an RTS meter must be upgraded by the current supplier before switching, so check first.

What if my first bill is wrong?

Contact Fuse promptly and supply an actual meter reading if the bill is estimated or incorrect. Keep paying undisputed amounts and do not let the first full month become overdue, because timely payment is a condition attached to UHZAMA68708.

Can I withdraw the referral credit as cash?

No. Under the published terms, credit generated using UHZAMA68708 is only offset against subsequent Fuse charges until used. It is not cash and is not refundable.

---

References

1. Fuse Energy — home, tariffs and app features
2. Fuse Energy — promotions and referral reward terms
3. Fuse Energy — energy supply terms and conditions
4. Fuse Energy — energy switching guide
5. Fuse Energy — smart meters explained
6. Fuse Energy — how Direct Debit works
7. Energy Networks Association — find a network operator and 105 guidance
8. SGN — what to do if you smell gas